Printable version

Drivers & software

* RECOMMENDED * Firmware Flash Component for Windows - HP MSA 2040/P2000/MSA2000 300GB,450GB,600GB 15K SAS LFF Hard Drives( HUS156030VLS600, HUS156045VLS600, HUS156060VLS600 )

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note:  Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type: Firmware - SAS Storage Disk
Version: A760(13 Dec 2013)
Operating System(s): Microsoft Windows 7 (32-bit)
Microsoft Windows 7 (64-bit)
Microsoft Windows 8 (32-bit)
Microsoft Windows 8 (64-bit)
Microsoft Windows Server 2003
Microsoft Windows Server 2003 64-Bit Edition
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Itanium
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 for Itanium-Based Systems
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Microsoft Windows Vista (32-bit)
Microsoft Windows Vista (64-bit)
Microsoft Windows XP Professional
Microsoft Windows XP Professional x64 Edition
File name: cp021932.exe (2.7 MB)
This Windows Smart Component contains a firmware update for the hard drive models HP MSA 2040/P2000/MSA2000 300GB,450GB,600GB 15K SAS LFF ( HUS156030VLS600, HUS156045VLS600, HUS156060VLS600 )

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the  Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log.

IMPORTANT: Please review the failure considerations above before flashing hard drives in MSA 2040/P2000/MSA2000 configurations.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

bfbdd3cea774c0c9f89095c66ef0eb25 cp021932.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

The Smart Component package is a self-extracting executable. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).

GUI option

  1. Place the downloaded firmware package in a temporary directory.

  2. Using Windows Explorer, navigate to the directory containing the download.

  3. Double click the executable file.

  4. Follow onscreen instructions.


CLI option

Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s

where:

  • ip_address is the management IP address of the array controller

  • username is the username account with management rights

  • password is the password for username

Instead of command line parameters you can use the following DOS environment variables:

  • oa_address: set this variable for the IP address of array controller

  • oa_username : set this variable for the username of array controller

  • oa_password : set this variable for the password of array controller


End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log.

IMPORTANT: Please review the failure considerations above before flashing hard drives in MSA 2040/P2000/MSA2000 configurations.


Notes:
Deliverable Name:
    Firmware Flash Component for Windows - HP MSA 2040/P2000/MSA2000 300GB,450GB,600GB 15K SAS LFF Hard Drives ( HUS156030VLS600, HUS156045VLS600, HUS156060VLS600 )
Release Version :
      A760


Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any HP MSA 2040 or P2000 G3 or MSA2000 array controller enclosure.


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Corrected potential hang when attempting to execute disk code prior to spin-up.
  • Fix for problem that can result in a self-initiated reset during queued sequential read.
  • Fixed watchdog timeout after Hard Reset.
  • Fix for buffer timeout causing delay in response for multi-stream sequential read workload.

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log.

IMPORTANT: Please review the failure considerations above before flashing hard drives in MSA 2040/P2000/MSA2000 configurations.

Version:A760 (13 Dec 2013)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Corrected potential hang when attempting to execute disk code prior to spin-up.
  • Fix for problem that can result in a self-initiated reset during queued sequential read.
  • Fixed watchdog timeout after Hard Reset.
  • Fix for buffer timeout causing delay in response for multi-stream sequential read workload.

Type: Firmware - SAS Storage Disk
Version: A760(13 Dec 2013)
Operating System(s):
Microsoft Windows 7 (32-bit)
Microsoft Windows 7 (64-bit)
Microsoft Windows 8 (32-bit)
Microsoft Windows 8 (64-bit)
Microsoft Windows Server 2003
Microsoft Windows Server 2003 64-Bit Edition
Microsoft Windows Server 2003 for 64-bit Extended Systems
Microsoft Windows Server 2008 Itanium
Microsoft Windows Server 2008 R2
Microsoft Windows Server 2008 R2 for Itanium-Based Systems
Microsoft Windows Server 2008 W32
Microsoft Windows Server 2008 x64
Microsoft Windows Server 2012
Microsoft Windows Server 2012 R2
Microsoft Windows Vista (32-bit)
Microsoft Windows Vista (64-bit)
Microsoft Windows XP Professional
Microsoft Windows XP Professional x64 Edition

Description

This Windows Smart Component contains a firmware update for the hard drive models HP MSA 2040/P2000/MSA2000 300GB,450GB,600GB 15K SAS LFF ( HUS156030VLS600, HUS156045VLS600, HUS156060VLS600 )

Installation Instructions

Prerequisites:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the  Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log.

IMPORTANT: Please review the failure considerations above before flashing hard drives in MSA 2040/P2000/MSA2000 configurations.


To ensure the integrity of your download, HP recommends verifying your results with this MD5 Checksum value:

bfbdd3cea774c0c9f89095c66ef0eb25 cp021932.exe

Reboot Requirement:
Reboot is not required after installation for updates to take effect and hardware stability to be maintained.


Installation:

The Smart Component package is a self-extracting executable. You can execute this module from the Windows graphical user interface (GUI) or the command line console (CLI).

GUI option

  1. Place the downloaded firmware package in a temporary directory.

  2. Using Windows Explorer, navigate to the directory containing the download.

  3. Double click the executable file.

  4. Follow onscreen instructions.


CLI option

Execute the Smart Component by entering the following command: CPxxxxxxx.exe /target <ip_address> /user <username> /passwd <password> /s

where:

  • ip_address is the management IP address of the array controller

  • username is the username account with management rights

  • password is the password for username

Instead of command line parameters you can use the following DOS environment variables:

  • oa_address: set this variable for the IP address of array controller

  • oa_username : set this variable for the username of array controller

  • oa_password : set this variable for the password of array controller


Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement


Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


Important:

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log.

IMPORTANT: Please review the failure considerations above before flashing hard drives in MSA 2040/P2000/MSA2000 configurations.


Notes:
Deliverable Name:
    Firmware Flash Component for Windows - HP MSA 2040/P2000/MSA2000 300GB,450GB,600GB 15K SAS LFF Hard Drives ( HUS156030VLS600, HUS156045VLS600, HUS156060VLS600 )
Release Version :
      A760


Supported Devices and Features:
Firmware on the listed drives can be updated when attached to any HP MSA 2040 or P2000 G3 or MSA2000 array controller enclosure.


Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Corrected potential hang when attempting to execute disk code prior to spin-up.
  • Fix for problem that can result in a self-initiated reset during queued sequential read.
  • Fixed watchdog timeout after Hard Reset.
  • Fix for buffer timeout causing delay in response for multi-stream sequential read workload.

Important

CAUTION: Updating the firmware of disk drives in a virtual disk risks the loss of data and causes the drives to be temporarily inaccessible.

IMPORTANT: Ensure that no other user is performing administrative functions on the MSA 2040/P2000/MSA2000 storage system

NOTE: Disk drive upgrades on the HP StorageWorks MSA 2040/P2000/MSA2000 is an offline process. All host and array I/O must be stopped prior to the upgrade. For more information, see the Array reference guide.All firmware flash progress messages are logged to %systemdrive%\CPQSYSTEM\Log\MSA2000_IP.log.

IMPORTANT: Please review the failure considerations above before flashing hard drives in MSA 2040/P2000/MSA2000 configurations.

Revision History

Version:A760 (13 Dec 2013)
Fixes

Upgrade Requirement:
Recommended - HP recommends users update to this version at their earliest convenience.


  • Corrected potential hang when attempting to execute disk code prior to spin-up.
  • Fix for problem that can result in a self-initiated reset during queued sequential read.
  • Fixed watchdog timeout after Hard Reset.
  • Fix for buffer timeout causing delay in response for multi-stream sequential read workload.

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.