|
Document Version
|
Release Date
|
Details
|
2
|
06/07/2018
|
Description section has been updated.
|
1
|
04/23/2018
|
Original Document Release.
|
The Smart Array P230i, P430, P431, P731m, P830i, and P830 Storage Controller Firmware version 4.54 addresses the following issues from prior firmware versions:
- DDR cache could be randomly disabled after several boots
- A hot-inserted replacement drive may show as a predictive failure if the original drive was identified as a predictive failure.
- The Controller cache module may be marked as permanently disabled if the Smart Storage Battery is removed or failed while the system is online, even if SSA was previously used to enable write caching without a backup power source.
- The Controller can become unresponsive due to a SmartCache pending flush operation when a read-ahead and a read-fill are performed in sequence.
- The System may stop responding if a parity error is found during surface scan of a RAID6 volume. (POST Lockup 0x13)
- The Controller crash dump may not be collected after a controller failure.
- Volume in NEEDS_REBUILD state never transitions to REBUILDING.
DETAILS
The firmware update applies to the following Smart Array controllers:
- HPE Smart Array P430 Controller
- HPE Smart Array P431 Controller
- HPE Smart Array P731m Controller
- HPE Smart Array P830 Controller
- HPE Smart Array P230i Controller
- HPE Smart Array P830i Controller
Upgrade to the Storage Controller firmware Smart Array P230i, P430, P431, P731m, P830i, and P830 version 4.54, available at the following URLs:
Supplemental Update / Online ROM Flash Component for Linux - Smart Array P230i, P430, P431, P731m, P830i, and P830
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_f7e4fc7fbc86428ca913ef561a
Supplemental Update / Online ROM Flash Component for Linux (x64) - Smart Array P230i, P430, P431, P731m, P830i, and P830
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_bdeb587e8d9249bd81a4343b07
Online ROM Flash Component for 32-bit Windows OS - Smart Array P230i, P430, P431, P731m, P830i, and P830
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_c9f4720ac6cc45ed83faa8d53c
Online ROM Flash Component for Windows (x64) - Smart Array P230i, P430, P431, P731m, P830i, and P830
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_f9e8a2cb87e849579e4e8d1f32
Online ROM Flash Component for VMware ESXi - Smart Array P230i, P430, P431, P731m, P830i, and P830
https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_89553deb6f7a403da250c13728
NOTE: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.
RECEIVE PROACTIVE UPDATES: Receive support alerts (such as Customer Advisories), as well as updates on drivers, software, firmware, and customer replaceable components, proactively via e-mail through HPE Subscriber's Choice. Sign up for Subscriber's Choice at the following URL: Proactive Updates Subscription Form.
NAVIGATION TIP: For hints on navigating HPE.com to locate the latest drivers, patches, and other support software downloads for ProLiant servers and Options, refer to the Navigation Tips document .
SEARCH TIP: For hints on locating similar documents on HPE.com, refer to the Search Tips Document .
Hewlett Packard Enterprise believes in being unconditionally inclusive. Efforts to replace noninclusive terms in our active products are ongoing.