Enabling embedded chipset SATA controller support

Use the Embedded SATA Configuration option to enable embedded chipset SATA (Serial Advanced Technology Attachment) controller support. You can select AHCI or HPE Smart Array SW RAID Support. Make sure that you are using the correct operating system drivers for your selected option.
CAUTION:

Dynamic Smart Array is not supported when the boot mode is configured to Legacy BIOS Mode. Enabling Dynamic SmartRAID RAID results in data loss or data corruption on existing SATA drives. Back up all drives before enabling this option.

See your operating system documentation before enabling SATA AHCI support to ensure your base media drivers support this feature.
Prerequisites

  • The correct operating system drivers for your selected option.

  • Boot Mode is set to UEFI Mode.
Procedure
  1. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Storage Options > SATA Controller Options > Embedded SATA Configuration.
  2. Ensure that you are using the correct ACHI or RAID system drivers for your SATA option.
  3. Select a setting.

    • SATA AHCI Support—Enables the embedded chipset SATA controller for AHCI.

    • SmartRAID SW RAID Support—Enables the embedded chipset SATA controller for Dynamic SmartRAID RAID.

  4. Save your setting.