Using Catalyst Copy

Procedure
  1. Click main menu and then SAP HANA > Databases > Actions > Protect Once.
  2. Select Catalyst Copy from the Protection Type menu.

    Snapshots

    1. Enter a name for the Snapshot.
    2. [Optional] Specify the number of Hours, Days, Weeks, or Months to auto delete the snapshot.
    3. [Optional] Specify the number of Hours, Days, or Weeks until the snapshot deletion has to be prevented.
  3. For Express Protect with the source as Snapshot and Target as Auto (default option), perform the following:
    NOTE:

    Ensure that a minimum of two HPE StoreOnce systems are registered with RMC.

    1. Select a Copy Repository.
    2. Select the Storage System Transport as either Auto, FC, or iSCSI.
    3. Select the StoreOnce Backup Transport as either Auto, FC, or Ethernet.
    4. Select the Backup Type options as per requirement.
    5. Specify the Number of Streams as either Auto or select from the numeric list.
    6. Specify the Express Protect name.
    7. Set the Verify Copy option to On or Off.
    8. [Optional] Specify the number of Hours, Days, Weeks, or Months to auto delete the snapshot.
    9. [Optional] Specify the number of Hours, Days, or Weeks until the snapshot deletion has to be prevented.
  4. For Catalyst Copy with the source as Express Protect and Target as Auto (default option), perform the following:
    1. Select a Copy Repository.
    2. Select the StoreOnce Replication Transport as eitherFC, or Ethernet. Specify the Coeth IP for Ethernet.
    3. [Optional] Specify the Catalyst Copy name.
    4. [Optional] Specify the number of Hours, Days, Weeks, or Months to auto delete the snapshot.
    5. [Optional] Specify the number of Hours, Days, or Weeks until the snapshot deletion has to be prevented.
  5. To set up the scheduler for the Catalyst Copy, select Start Date & Time and set the required date and time. Select Now to run the scheduler once.
  6. Click Ok.