Failure of bootstrap nodes installation

Symptom

Unable to find the string Waiting for etcd cluster' for bootstrap node.

Cause
Following reasons can cause this issue:

  • Infrastructure environment issues (DNS or Load Balancer).

  • Unsupported or unstable RHOCP artifacts downloaded to the NPS toolkit VM during creation of artifacts.

Action
  1. Log in to the DNS server and verify the configuration.
  2. Perform an nslookup for the server.
    NOTE:

    For unsupported versions, raise a ticket with HPE Technical Support Team to get the latest supported versions.

  3. Fix the issues, if any.
  4. Log in to NPS toolkit VM.
  5. Delete the image-service pod using the following command: 
    nps baremetal -a delete -nos <nos_type>
    Where,

    nos - is Network Operating System and the <nos_type> is cumulus or aruba.

  6. Clean up the impacted server. For information on cleanup procedure, see HPE DL server cleanup procedure.
  7. Run the hardware preparation for the impacted server using the following command: 
    nps deploy -s hw_prep -l debug -sl <Server_ilo_ip> -a raid
nps deploy -s hw_prep -l debug -sl <Server_ilo_ip> -a bios
  8. Run the following command for bringing up the image-service pod and for pxe booting the server: 
    nps baremetal -a install -nos <nos_type> -l debug
    Where,

    nos - is Network Operating System and the <nos_type> is cumulus or aruba.