(At software release K.13.01, the DNS-compatible commands include ping and traceroute.)
-
-
The IP address for a DNS server operating in a domain in your network.
-
The priority (1 to 3) of the selected server, relative to other DNS servers in the domain.
-
The domain name for an accessible domain in which there are hosts you want to reach with a DNS-compatible command. (This is the domain suffix in the fully qualified domain name for a given host operating in the selected domain. See DNS resolver operation.) Note that if a domain suffix is not configured, fully qualified domain names can be used to resolve DNS-compatible commands.
-
The host names assigned to target IP addresses in the DNS server for the specified domain.
-
-
Use the data from the first three bullets in step1 to configure the DNS entry on the switch.
-
Use a DNS-compatible command with the host name to reach the target devices.