Adding a priority description

This description can be added with the CLI or SNMP. The CLI command is:

Syntax:

logging priority-descr text_string
no logging priority-descr

Provides a user-friendly description for the combined filter values of severity and system module. If no description is entered, this is blank.

If text_string contains white space, use quotes around the string.

Use the no form of the command to remove the description.

Limit: 255 characters

Example:

The logging command with a priority description

HP Switch(config)# logging priority-descr severe-pri


	NOTE: A notification is sent to the SNMP agent if there are any changes to the syslog parameters, either through the CLI or with SNMP.

prev	up	next
Adding a description for a Syslog server	home	Configuring the severity level for Event Log messages sent to a syslog server