Commands
Job at | delay | enable | disable
at | delay | enable | disableSet schedule jobs using the options and set the count for the number of times the job is repeated.
Syntax
job JOB
NAME at | delay | enable | disable
Description
Schedule a command to run automatically. Jobs can be scheduled to run once, multiple times on a recurring basis, or after certain events such as reboots. All commands run with manager privilege in configuration context.
The [no] form of the command deletes a scheduled job.
By default, jobs will be repeated an infinite number of times.
Restrictions
Jobs scheduled at any event will not be counted.
Jobs that are scheduled at the event “reboot” will not work in some multi management switches.
Range
<1-1000>: is the value range for the
countoption.([[DD:]HH:]MM): is the format used for the specific delay.
Options
| count | Specify the number of times the job should run. |
| delay | Specify the delay before running the job. |
| enable | Enable a job that is disabled or expired. |
| disable | Disable a job. By default, a job is enabled. |
Usage
job <JOB
NAME> at <([DD:]HH:]MM on <WEEKDAY-LIST>)> config-save <COMMAND> count <1-1000>
job <JOB
NAME> at <[HH:]MM on [MM/]DD> config-save <COMMAND> count <1-1000>
job <JOB
NAME> at <EVENT> config-save <COMMAND>
job <JOB
NAME> delay <([DD:]HH:]MM> config-save <COMMAND> count <1-1000>
job <JOB
NAME> enable | disable
[no]job <JOB NAME>
Show job
Syntax
show job
Description
Show the jobs scheduled.
Show job
HP-2620-48-PoEP# show job
Job Scheduler Status and Configuration
Scheduler Status : Waiting for the system time to be set
Event or Repeat Save
Name Time Count Cfg Command
------------------ ---------------- ------- ---- ------------
Burrrrrrrrrrrr... reboot -- Yes chassislocate blink
baz reboot -- No show time
foo 17:00 SxTWTxS -- No savepower led
a1 12:00 2 Yes sh time
a2 Every 2:14:30 days 75 Yes vlan 3
a3 Every 00:00:25 days 1 No vlan 4Show job <Name>
Syntax
show job JOB
NAME
Description
Show the job by name.
Show job <JOB NAME>
Aruba-3810M-16SFPP-2s # show job a1 Job Information Job Name : a1 Runs At : 01:24 Config Save : No Repeat Count: -- Job Status : Enabled Run Count : 1 Error Count : 0 Command : show time Job Status : Enabled Output from Last Run -------------------- Tue Dec 15 01:24:00 2015 HP-2530-24 # show job a2 Job Information Job Name : a2 Runs At : Every 2:14:30 days Config Save : Yes Repeat Count: 75 Run Count : 0 Error Count : 0 Command : vlan 3 Job Status : Disabled HP-2530-24 # show job foo Job Information Job Name : foo Runs At : 17:00 SxTWTxS Config Save : Yes Repeat Count: -- Run Count : 0 Error Count : 0 Command : savepower led Job Status : Enabled