Using the Menu to configure local mirroring

Menu and WebAgent limits

You can use the Menu and WebAgent to quickly configure or reconfigure local mirroring on session 1 and allow one of the following two mirroring source options:

  • Any combination of source ports, trunks, and a mesh.

  • One static, source VLAN interface.

The Menu and WebAgent also has these limits:

  • Configure and display only session 1 and only as a local mirroring session for traffic in both directions on the specified interface. (Selecting inbound-only or outbound-only is not an option.)

  • If session 1 has been configured in the CLI for local mirroring for inbound-only or outbound-only traffic on one or more interfaces, using the Menu to change the session 1 configuration automatically reconfigures the session to monitor both inbound and outbound traffic on the designated interface(s.)

  • If session 1 has been configured in the CLI with an ACL/classifier-based mirroring policy or as a remote mirroring session, the Menu is not available for changing the session 1 configuration.

  • The CLI (and SNMP) can be used to override any Menu configuration of session 1.