Configuring a source switch in a local mirroring session
Enter the mirror port command
on the source switch to configure an exit port on the same switch.
To create the mirroring session, use the information gathered in High-level overview of the mirror configuration process.
Syntax
Assigns the exit port to use for the specified mirroring session and must be executed from the global configuration level.
1 - 4Identifies the mirroring session created by this command. (Multiple sessions on the switch can use the same exit port.) namename-strOptional alphanumeric name string used to identify the session ( up to 15 characters) portexit-port-#Exit port for mirrored traffic in the remote session. This is the port to which a traffic analyzer or IDS is connected. The
noform of the command removes the mirroring session and any mirroring source previously assigned to that session.