Removing a stack Member (Menu)
These rules affect removals from a stack:
When a Candidate becomes a Member, its
Auto Joinparameter is automatically set toNo. This prevents the switch from automatically rejoining a stack as soon as you remove it from the stack.When you use the Commander to remove a switch from a stack, the switch rejoins the Candidate pool for your IP subnet (broadcast domain), with
Auto Joinset toNo.When you remove a Member from a stack, it frees the previously assigned switch number (
SN), which then becomes available for assignment to another switch that you may subsequently add to the stack. The default switch number used for an add, is the lowest unassigned number in the Member range (1 - 15; 0 is reserved for the Commander).
To remove a Member from a stack, use the Stack Management screen.
From the Main Menu, select 9. Stacking ⇒ 4. Stack Management
The Stack Management screen appears.
The stack management screen with stack members listed
Pacific Ocean ======================- CONSOLE - MANAGER MODE -=========================== Stacking - Stack Management Switch Number : 3 MAC Address: Candidate password: Candidate MAC System Name Device Type ------------- ---------------- ----------- 0060b0-e94300 DEFAULT_CONFIG switch 080009-918f80 DEFAULT_CONFIG switch Actions-> Cancel Edit Save Help Use arrow keys to change field selection, <Space> to toggle field choices, and <Enter> to go to Actions.Use the down-arrow key to select the Member to remove from the stack.
Type D (for Delete) to remove the selected Member from the stack.
You will see the following prompt:
To continue deleting the selected Member, press the Space bar once to select Yes for the prompt, then press Enter to complete the deletion. The Stack Management screen updates to show the new stack Member list.
