Viewing the status of all stack-enabled switches discovered in the IP subnet (CLI)
Syntax:
show stack all
Lists all the stack-configured switches discovered in the IP subnet.
Using the show stack all command to list
discovered switches in the IP subnet
In this example, because the switch on which
the show stack all command was executed is a Candidate,
it is included in the Others category.
switch(config)#: show stack all
Stacking - Stacking Status (All)
Stack Name MAC Address System Name Status
--------------- ------------- ------------------------- --------------------
Big_Waters 1cc1de-cfbc80 Big_Waters-0 Commander Up
000883-08f980 Big_Waters-1 Member Up
Others: 0060b0-889e00 DEFAULT_CONFIG Candidate