Syntax:
Copies and executes the named text file from a USB flash drive and executes the ACL commands in the file.
<
filename
.txt>A text file containing ACL commands and stored in the USB flash drive <unix | pc>
The type of workstation used to create the text file. Depending on the ACL commands used, this action does one of the following in the running-config file:
Example:
Using a PC workstation, you then execute the following from the CLI to upload the file to the switch and implement the ACL commands it contains:
HP Switch(config)# copy usb command-file vlan10_in.txt pcThe switch displays this message:
Running configuration may change, do you want to continue [y/n]?To continue with the upload, press the [Y] key. To abort the upload, press the [N] key. Note that if the switch detects an illegal (non-ACL) command in the file, it bypasses the illegal command, displays a notice (as in the tftp Example: shown in Using the copy command to download and configure an ACL), and continues to implement the remaining ACL commands in the file.