The TR-069 client offers some tools to diagnose problems:
The CPE implements the following system log notification codes and sample messages:
To avoid flooding the system log on frequent attempts to connect with the ACS, the following criteria are used with both successful and failed attempts:
The HTTP file transfer component supports these system log notification codes and sample messages:
-
-
W 11/19/13 08:06:13 04190 http: Upload of SourceFile to http://10.0.11.240:9876/path failed (errno 13).
-
W 11/19/13 08:06:13 04190 http: Upload of SourceFile to http://10.0.11.240:9876/path failed (errno 1).
-
W 11/19/13 08:06:13 04190 http: Download of http://10.0.11.240:9876/path to DestinationFile failed (errno 13).
-
W 11/19/13 08:06:13 04190 http: Download of http://10.0.11.240:9876/path to DestinationFile failed (errno 1).
-
W 11/19/13 08:06:13 04190 http: Download of http://10.0.11.240:9876/path to DestinationFile failed (errno 17).
-
The following commands help assess the general state of TR–069 and control the source of the ACS configuration record:
Status/control commands
Command | Result |
---|---|
show cwmp status |
CWMP is Enabled ACS URL : https://16.93.62.32:9443 ACS URL is set by : Config ACS Username : bims Connection status : Disconnected Data transfer status : None Time of last successful connection : Thu Feb 20 01:16:59 2014 Interval upon to next connection : Null |
show cwmp configuration |
CWMP is Enabled ACS URL : https://16.93.62.32:9443 ACS Username : bims Inform Enable Status : Disabled Inform Interval : 3559 Inform Time : Reconnection times : 30 |
[no] |
Prevents using any ACS information from DHCP |