Loading a local certificate
To load a local certificate (single certificate/certificate chain), execute the following command.
Syntax:
(Switch_Name#)copy tftp local-certificate <ip-addr> <file-name>
(Switch_Name#)copy sftp local-certificate [user <user-name>] [<ip-addr/ipv6-addr/host-name-str>] [<username@ip-str>] <filename> [port <1-65535>]
Definitions:
ta-certificate
|
Copy a Trust Anchor certificate to the device.
|
ta-profile-name
|
The Trust Anchor Profile associated with the certificate.
|
local certificate
|
Local Certificate to be copied.
|
ip-addr
|
IP address of the server.
|
file-name
|
Name of the certificate file.
|
ipv6-addr
|
Specify TFTP server IPv6 address.
|
host-name-str
|
Specify hostname of the SFTP server.
|
user
|
Specify the username on the remote system.
|
username@ip-str
|
Specify the username along with remote system information (hostname, IPv4 or IPv6 address.)
|
port
|
TCP port of the SSH server on the remote system.
|
|
|
|
NOTE: The loaded certificate is validated against a pending Certificate Request and the maximum number of intermediate certificates allowed is 3 (with a maximum of 5 certificates in a chain). Intermediate certificates must either be loaded before the local certificate or are included as part of the local certificate.
|
|
|