Validation |
Error |
---|---|
Check if BFD is enabled in global context before user tries to enable it on app. |
BFD is not configured on the switch. |
Check if the hardware on which BFD is configured in V3. |
BFD is not supported on V1 or V2 modules. |
Check if user is trying to change echo packet source IP while the session is alive. |
The BFD echo source IP address cannot be changed for an active session. |
Check if BFD is disabled on all apps before user tries to disable it globally. |
BFD cannot be disabled globally until it is disabled for all applications. |
Check for invalid IPV4 address. |
Invalid source IP address configured for BFD echo. |
Check for invalid Vlan ID. |
Invalid VLAN ID. |
Check for GVRP VLAN ID. |
BFD cannot be enabled on a GVRP VLAN. |
Check for multinet VLANs, VLANs with multiple IP addresses. |
BFD cannot be configured on a multinet VLAN. |
Attempt to add more than one IP address on a VLAN which has already BFD enabled on it. |
Multiple IP addresses cannot be configured on a VLAN with BFD enabled. |
Check for any attempt to access non-existing session. |
BFD session not found. |
Check for the password provided to be of valid length. |
Authentication password must be 1 to 20 characters long. |
Check the password provided if it contains any invalid characters. |
Invalid password. The password cannot contain the special characters \\, \", or ?. |