Converting a dynamic VLAN to a static VLAN

Syntax:

static-vlan vlan-id

Converts a dynamic, port-based VLAN membership to a static, port-based VLAN membership (allows port-based VLANs only).

For this command,vlan-id refers to the VID of the dynamic VLAN membership. Use show vlan to help identify the VID.

This command requires that GVRP is running on the switch and a port is currently a dynamic member of the selected VLAN.

After you convert a dynamic VLAN to static, you must configure the switch's per-port participation in the VLAN in the same way that you would for any static VLAN.

Converting a dynamic VLAN to a port-based static VLAN

Suppose a dynamic VLAN with a VID of 125 exists on the switch. The following command converts the VLAN to a port-based, static VLAN:

HP(config)#: static-vlan 125

prev	up	next
Deleting a static VLAN	home	Configuring static VLAN per-port settings