multicast-addr / mask Inconsistent address and mask.
|
The mask entered for the specified multicast address does not specify sufficient bits to include the nonzero bits in the mask. |
pkt-type pkt, src IP
[
ip-addr] vid
[
vid-#] (not a nbr)
|
A PIM packet was received that does not have a neighbor.. |
Bad parameter-name in
pkt-type
pkt from IP
ip-addr
|
The PIM packet was dropped because of a bad parameter in the packet from the IP address shown. |
BSM send to
ip-addr failed
|
A BSM send failed. The IP address shown is the BSM destination address. |
Candidate BSR functionality disabled
pkt-type
|
Candidate BSR functionality has been disabled. |
C-RP functionality disabled
|
C-RP functionality has been disabled. |
C-RP advertisement send to
ip-addr failed
|
A C-RP advertisement send failed. The IP address shown is the destination address of the message. |
Enabled as Candidate BSR using address:
ip-addr
|
Candidate BSR functionality has been enabled at the indicated IP address. |
Enabled as C-RP using address:
ip-addr
|
C-RP functionality has been enabled at the indicated IP address. |
Failed alloc of HW
flow for flow
src-ip-addr , multicast-addr
|
Hardware resources are consumed and software routing is being done for the flow. |
Failed to initialize
pkt-type as a call back routine
|
The IP address manager PIM callback routine failed to initialize. |
Failed to alloc a
pkt-type pkt (vid
vid-# )
|
Allocation of a packet buffer failed message. |
I/F configured with IP
ip-addr on vid
vid-#
|
The IP address on the PIM interface has changed to the indicated address. |
I/F removal with IP
ip-addr on vid
vid-#
|
The PIM interface has been removed because of IP address removal or change of the indicated IP address. |
Illegal operation in BSR state machine
|
An illegal state/event combination has been detected in the BSR state machine. |
Malformed C-RP adv recvd from
ip-addr
|
The switch received a malformed C-RP-advertisement. |
MCAST MAC add for
mac-addr failed
|
The indicated interface could not join the multicast group for PIM packets. |
MCAST flow
src-ip-addr , multicast-addr not rteing (rsc low)
|
A multicast flow has been dropped due to low resources |
Multicast Hardware Failed to initialize
|
The multicast hardware cannot be enabled. |
No IP address configured on VID
vid-#
|
An IP address is not configured for the indicated interface enabled with PIM. |
No route to source/rp
ip-addr
|
PIM was unable to find a route to the specified IP address. |
No RP for group
ip-addr
|
PIM-SM needed an RP for the indicated group address, but none was found. |
Inconsistent address and mask
|
The group prefix needs a route/mask entry. For example, if you want, 224.x.x.x/4, you input 224.0.0.0/4. |
Pkt dropped from
ip-addr
reason, vid
vid-#
|
Received a packet from the indicated IP address and VLAN, and dropped it. |
Pkt rcvd with a cksum error from
ip-addr
|
A packet arrived from the indicated IP address with a checksum error. |
PIM socket error
|
There was an error regarding the PIM socket, either on a sockopt call or a recvfrom call. |
Rcvd pkt ver# # , from
ip-addr ,expected #
|
Received a packet from the indicated IP address with the wrong PIM version number. |
Rcvd pkt from rtr
ip-addr , unkwn pkt type
pkt-type
|
Unknown PIM packet type received from the indicated IP address. |
Rcvd hello from
ip-addr on vid
vid-#
|
A misconfiguration exists between the routers. |
Rcvd incorrect hello from
ip-addr
|
An incorrect hello packet was received from the indicated IP address. |
Rcvd unkwn opt # in
pkt-type pkt from
ip-addr
|
A PIM packet with an unknown option number was received from the indicated IP address. |
Rcvd unkwn addr fmly
add-family in
pkt-type pkt from
ip-addr
|
A PIM packet with an unknown address family was received. |
Rcvd
pkt-type pkt with bad len from
ip-addr
|
A PIM packet with an inconsistent length was received from the indicated IP address. |
Send error(
error-# ) on
packet-type pkt on VID
vid-#
|
Send packet failed on the indicated VLAN. |
Static RP configuration failure:
src-ip-addr , multicast-addr
|
The configuration of a static RP for the indicated multicast group has failed on the indicated interface. |
Unable to alloc a buf of size
size for
memory element
|
PIM_DM could not allocate memory for the indicated buffer. |
Unable to alloc a msg buffer for
system-event
|
Informs the user that a message buffer could not be allocated for the indicated system event. |
Unable to allocate
table-type table
|
The PIM interface has been removed due to an IP address removal or change. |
Unexpected state/event
state /event in
statemachine statemach
|
PIM received an event type in a state that was not expected. |
VLAN is not configured for IP.
|
A VLAN must be statically configured with a primary IP address before enabling PIM-SM on that VLAN. If the VLAN has no IP address or is configured to acquire a primary IP address by using DHCP/Bootp, it cannot be configured to support PIM-SM. |