stp region-configuration
Use stp region-configuration to enter MST region view.
Use undo stp region-configuration to restore the default MST region configurations.
Syntax
stp region-configuration
undo stp region-configuration
Default
The default settings for an MST region are as follows:
The MST region name of the device is its MAC address.
All VLANs are mapped to the CIST.
The MSTP revision level is 0.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
After you enter MST region view, you can configure MST region parameters, including the region name, VLAN-to-instance mappings, and revision level.
Examples
# Enter MST region view.
<Sysname> system-view [Sysname] stp region-configuration [Sysname-mst-region]