stp port shutdown permanent
Use stp port shutdown permanent to disable the device from reactivating edge ports shut down by BPDU guard.
Use undo stp port shutdown permanent to restore the default.
Syntax
stp port shutdown permanent
undo stp port shutdown permanent
Default
The device reactivates an edge port shut down by BPDU guard after the port status detection timer expires.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command takes effect only on edge ports shut down by BPDU guard after this command is configured. The device does not bring up the shutdown ports if you execute the undo stp port shutdown permanent command. To bring up these ports, you must use the undo shutdown command.
For more information about the port status detection timer, see device management configuration in Fundamentals Configuration Guide.
Examples
# Disable the device from reactivating edge ports shut down by BPDU guard.
<Sysname> system-view [Sysname] stp port shutdown permanent