check region-configuration
Use check region-configuration to display MST region pre-configuration information.
Syntax
check region-configuration
Views
MST region view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
Spanning tree devices belong to the same MST region only when they are connected through a physical link and configured with the same details as follows:
Format selector (0 by default and not configurable).
MST region name.
MST region revision level.
VLAN-to-instance mapping entries in the MST region.
As a best practice, use this command to determine whether the MST region configurations to be activated are correct. Activate them only when they are correct.
Examples
# Display MST region pre-configurations.
<Sysname> system-view [Sysname] stp region-configuration [Sysname-mst-region] check region-configuration Admin Configuration Format selector : 0 Region name : 001122334400 Revision level : 0 Configuration digest : 0x3ab68794d602fdf43b21c0b37ac3bca8 Instance VLANs Mapped 0 1, 3 to 4094 15 2
Table 35: Command output
Field | Description |
|---|---|
Format selector | Format selector of the MST region, which is 0 (not configurable). |
Region name | MST region name. |
Revision level | Revision level of the MST region. |
Instance VLANs Mapped | VLAN-to-instance mappings in the MST region. |
Related commands
active region-configuration
instance
region-name
revision-level
vlan-mapping modulo