loopback-detection interval-time

Use loopback-detection interval-time to set the loop detection interval.

Use undo loopback-detection interval-time to restore the default.

Syntax

loopback-detection interval-time interval

undo loopback-detection interval-time

Default

The loop detection interval is 30 seconds.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Sets the loop detection interval in the range of 1 to 300 seconds.

Usage guidelines

With loop detection enabled, the device sends loop detection frames at the specified interval. A shorter interval offers more sensitive detection but consumes more resources. Consider the system performance and loop detection speed when you set the loop detection interval.

Example

# Set the loop detection interval to 10 seconds.

<Sysname> system-view
[Sysname] loopback-detection interval-time 10

Related commands

display loopback-detection