mrp timer leave
Use mrp timer leave to set the Leave timer.
Use undo mrp timer leave to restore the default.
Syntax
mrp timer leave timer-value
undo mrp timer leave
Default
The Leave timer is 60 centiseconds.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
timer-value: Specifies the Leave timer value (in centiseconds). The Leave timer must meet the following requirements:
Greater than two times the Join timer.
Less than the LeaveAll timer.
Divisible by 20 centiseconds.
Examples
# Set the Leave timer to 100 centiseconds. (In this example, the Join timer and LeaveAll timer use their default settings.)
<Sysname> system-view [Sysname] interface ten-gigabitethernet 1/0/1 [Sysname-Ten-GigabitEthernet1/0/1] mrp timer leave 100
Related commands
display mvrp running-status
mrp timer join
mrp timer leaveall