display protocol-vlan interface
Use display protocol-vlan interface to display protocol-based VLANs that are associated with the specified ports.
Syntax
display protocol-vlan interface { interface-type interface-number1 [ to interface-type interface-number2 ] | all }
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-type interface-number1 to interface-type interface-number2: Specifies an interface range. Both the interface-type interface-number1 argument and the interface-type interface-number2 argument represent the interface type and interface number. The value for the interface-number2 argument must be greater than or equal to the value for the interface-number1 argument.
all: Specifies all ports.
Examples
# Display protocol-based VLAN information on Ten-GigabitEthernet 1/0/1.
<Sysname> display protocol-vlan interface ten-gigabitethernet 1/0/1 Interface: Ten-GigabitEthernet1/0/1 VLAN ID Protocol index Protocol type Status 2 0 IPv6 Active 2 1 N/A Inactive 4094 65535 IPv4 Inactive
Table 20: Command output
Field | Description |
|---|---|
VLAN ID | ID of the protocol-based VLAN. |
Protocol index | Protocol template index. |
Protocol type | Protocol type specified by the protocol template. This field displays N/A if the protocol type is not specified. |
Status | Whether the protocol-based VLAN has taken effect:
|
Related commands
display protocol-vlan vlan
port hybrid protocol-vlan
protocol-vlan