port bridge enable

Use port bridge enable to enable port bridging on a Layer 2 aggregate interface.

Use undo port bridge enable to disable port bridging on a Layer 2 aggregate interface.

Syntax

port bridge enable

undo port bridge enable

Default

Port bridging is disabled on a Layer 2 aggregate interface.

Views

Layer 2 aggregate interface view

Predefined user roles

network-admin

mdc-admin

Usage guidelines

By default, the device drops a packet if its outgoing interface is the incoming interface where the packet arrived. Port bridging enables a Layer 2 aggregate interface to reflect a packet back when it is both the incoming and outgoing interfaces of that packet.

Examples

# Enable port bridging on Bridge-Aggregation 1.

<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] port bridge enable