mac-address static source-check enable
Use mac-address static source-check enable to enable the static source check feature.
Use undo mac-address static source-check enable to disable the static source check feature.
Syntax
mac-address static source-check enable
undo mac-address static source-check enable
Default
The static source check feature is enabled.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
IRF physical interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Disable the static source check feature on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view [Sysname] interface ten-gigabitethernet 1/0/1 [Sysname-Ten-GigabitEthernet1/0/1] undo mac-address static source-check enable