mac-address mac-learning priority

Use mac-address mac-learning priority to assign MAC learning priority to an interface.

Use undo mac-address mac-learning priority to restore the default.

Syntax

mac-address mac-learning priority { high | low }

undo mac-address mac-learning priority

Default

Low MAC address learning priority is used.

Views

Layer 2 Ethernet interface view

Layer 2 aggregate interface view

Predefined user roles

network-admin

mdc-admin

Parameters

high: Assigns high MAC learning priority.

low: Assigns low MAC learning priority.

Usage guidelines

The MAC address learning priority values can be high and low. An interface with high MAC address learning priority can learn any MAC address. An interface with low MAC address learning priority can learn only the MAC addresses that have not been learned by high-priority interfaces.

The MAC learning priority mechanism can help defend your network against MAC address spoofing attacks. To prevent the downlink interface from learning the MAC address of an upper layer device (for example, the gateway), you can perform the following tasks:

• Assign high MAC learning priority to an uplink interface.

• Assign low MAC learning priority to a downlink interface.

Examples

# Assign high MAC learning priority to Ten-GigabitEthernet 1/0/1.

<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] mac-address mac-learning priority high

# Assign high MAC learning priority to Bridge-Aggregation 1.

<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] mac-address mac-learning priority high