Restoring the default settings of the tunnel interface

	CAUTION: This operation might interrupt ongoing network services. Make sure you are fully aware of the impact of this operation when you perform it on a live network.

This operation might fail to restore the default settings for some commands for reasons such as command dependencies or system restrictions. Use the display this command in interface view to identify these commands. Use their undo forms or follow the command reference to restore their default settings. If your restoration attempt still fails, follow the error message instructions to resolve the problem.

1. Enter system view.

   system-view

2. Enter tunnel interface view.

   interface tunnel number

3. Restore the default settings of the tunnel interface.

   default