[x]

Configuring the DHCPv6 client > Setting the DSCP value for DHCPv6 packets sent by the DHCPv6 client

 

 Next

Setting the DSCP value for DHCPv6 packets sent by the DHCPv6 client

About setting the DSCP value for DHCPv6 packets

The DSCP value of a packet specifies the priority level of the packet and affects the transmission priority of the packet.

Procedure

  1. Enter system view.

    system-view

  2. Set the DSCP value for DHCPv6 packets sent by the DHCPv6 client.

    ipv6 dhcp client dscp dscp-value

    By default, the DSCP value in DHCPv6 packets sent by the DHCPv6 client is 56.

prev

 

up

 next

Configuring acquisition of configuration parameters except IP addresses and prefixes 

home

 Display and maintenance commands for DHCPv6 client

© Copyright 2017 Hewlett Packard Enterprise Development LP