Enabling IPv6 local fragment reassembly

About IPv6 local fragment reassembly

Use this feature on a multichassis IRF fabric to improve fragment reassembly efficiency. This feature enables a subordinate to reassemble the IPv6 fragments of a packet if all the fragments arrive at it. If this feature is disabled, all IPv6 fragments are delivered to the master device for reassembly.

Restrictions and guidelines

The IPv6 local fragment reassembly feature applies only to fragments destined for the same subordinate.

Procedure

  1. Enter system view.

    system-view

  2. Enable IPv6 local fragment reassembly.

    ipv6 reassemble local enable

    By default, IPv6 local fragment reassembly is disabled.