Display and maintenance commands for adjacency table

NOTE:

The device only supports displaying adjacency entries about tunnel interfaces whose link layer protocol is P2P.

Execute display commands in any view.

Task	Command
Display IPv4 adjacency table information.	display adjacent-table { all \| physical-interface interface-type interface-number \| routing-interface interface-type interface-number \| slot slot-number } [ count \| verbose ]
Display IPv6 adjacency table information.	display ipv6 adjacent-table { all \| physical-interface interface-type interface-number \| routing-interface interface-type interface-number \| slot slot-number } [ count \| verbose ]

prev	up	next
About the adjacency table	home	Configuring IRDP