display irf configuration

Use display irf configuration to display basic IRF settings for each member device.

Syntax

Views

Any view

Predefined user roles

network-admin

network-operator

Examples

# Display basic IRF settings for all members.

<Sysname> display irf configuration
 MemberID  NewID    IRF-Port1                   IRF-Port2
 1         1        Ten-GigabitEthernet1/0/5    Ten-GigabitEthernet1/0/6
 2         2        Ten-GigabitEthernet2/0/5    Ten-GigabitEthernet2/0/6
                    Ten-GigabitEthernet2/0/7
                    Ten-GigabitEthernet2/0/8
 4         4        Ten-GigabitEthernet4/0/5    Ten-GigabitEthernet4/0/6
                                                Ten-GigabitEthernet4/0/7
                                                Ten-GigabitEthernet4/0/8

Table 2: Command output

Field	Description
MemberID	Current member ID of the device.
NewID	Member ID assigned to the device. This member ID takes effect at reboot.
IRF-Port1	Physical interfaces bound to IRF-port 1. This field displays disable if no physical interfaces are bound to the IRF port.
IRF-Port2	Physical interfaces bound to IRF-port 2. This field displays disable if no physical interfaces are bound to the IRF port.

Related commands

display irf

display irf topology

prev	up	next
display irf	home	display irf link