Configuring a network port
Restrictions and guidelines
In a VLAN with MFF enabled, you need to configure the following ports as network ports:
Upstream ports connected to the gateway.
Ports connected to other MFF devices.
Link aggregation is supported by network ports in an MFF-enabled VLAN, but it is not supported by user ports in the VLAN. You can add the network ports to link aggregation groups, but cannot add the user ports to link aggregation groups. For more information about link aggregation, see Layer 2—LAN Switching Configuration Guide.
Procedure
Enter system view.
system-view
Enter interface view.
interface interface-type interface-number
Configure the port as a network port.
mac-forced-forwarding network-port
By default, the port is a user port.