Example: Configuring static IPv6SG
Network configuration
As shown in Figure 154, configure a static IPv6SG binding on HundredGigE 1/0/1 of the device to allow only IPv6 packets from the host to pass.
Figure 154: Network diagram
Procedure
# Enable IPv6SG on HundredGigE 1/0/1.
<Device> system-view [Device] interface hundredgige 1/0/1 [Device-HundredGigE1/0/1] ipv6 verify source ip-address mac-address
# On HundredGigE 1/0/1, configure a static IPv6SG binding for the host.
[Device-HundredGigE1/0/1] ipv6 source binding ip-address 2001::1 mac-address 0001-0202-0202 [Device-HundredGigE1/0/1] quit
Verifying the configuration
# Verify that the static IPv6SG binding is configured successfully on the device.
[Device] display ipv6 source binding static Total entries found: 1 IPv6 Address MAC Address Interface VLAN Type 2001::1 0001-0202-0202 HGE1/0/1 N/A Static