Configuring SNMP notifications for IKE

After you enable SNMP notifications for IKE, the IKE module notifies the NMS of important module events. The notifications are sent to the device's SNMP module. For the notifications to be sent correctly, you must also configure SNMP on the device. For more information about SNMP notifications, see Network Management and Monitoring Configuration Guide.

To generate and output SNMP notifications for a specific IKE failure or event type, perform the following tasks:

1. Enable SNMP notifications for IKE globally.

2. Enable SNMP notifications for the failure or event type.

1. Enter system view

   system-view

2. Enable SNMP notifications for IKE globally.

   snmp-agent trap enable ike global

   By default, SNMP notifications for IKE are disabled.

3. Enable SNMP notifications for the specified failure or event types.

   snmp-agent trap enable ike [ attr-not-support | auth-failure | cert-type-unsupport | cert-unavailable | decrypt-failure | encrypt-failure | invalid-cert-auth | invalid-cookie | invalid-id | invalid-proposal | invalid-protocol | invalid-sign | no-sa-failure | proposal-add | proposal–delete | tunnel-start | tunnel-stop | unsupport-exch-type ] *

   By default, SNMP notifications for all failure and event types are disabled.