Sending 802.1X protocol packets out of a port without VLAN tags
About 802.1X protocol packet sending
This feature enables the device to send 802.1X protocol packets out of an 802.1X-enabled port without VLAN tags. Use this feature to prevent terminal devices connected to the port from failing 802.1X authentication when the following conditions exist:
The port is configured as a tagged member of the port VLAN.
The terminal devices send 802.1X protocol packets without VLAN tags for authentication and cannot identify 802.1X protocol packets with VLAN tags..
Restrictions and guidelines
Do not configure this feature in other situations except the previously mentioned situation.
This feature is supported only on Ethernet ports of which the link type is hybrid.
Procedure
Enter system view.
system-view
Enter interface view.
interface interface-type interface-number
Enable the device to send 802.1X protocol packets out of the port without VLAN tags.
dot1x eapol untag
By default, whether the device sends 802.1X protocol packets out of a port with VLAN tags depends on the configuration in the VLAN module.