Setting the maximum number of authentication request attempts

About authentication request retransmission

The access device retransmits an authentication request if it does not receive any responses to the request from the client within a period of time. To set the time, use the dot1x timer tx-period tx-period-value command or the dot1x timer supp-timeout supp-timeout-value command. The access device stops retransmitting the request if it has made the maximum number of request transmission attempts but still receives no response.

Procedure

  1. Enter system view.

    system-view

  2. Set the maximum number of attempts for sending an authentication request.

    dot1x retry retries

    The default setting is 2.