Display and maintenance commands for MLD


[CAUTION: ]

CAUTION:

The reset mld group command might cause IPv6 multicast data transmission failures.


Execute display commands in any view and reset commands in user view.

Task

Command

Display information about MLD multicast groups.

display mld [ vpn-instance vpn-instance-name ] group [ ipv6-group-address | interface interface-type interface-number ] [ static | verbose ]

Display MLD information for interfaces.

display mld [ vpn-instance vpn-instance-name ] interface [ interface-type interface-number ] [ proxy ] [ verbose ]

Display IPv6 multicast routing entries maintained by the MLD proxy.

display mld [ vpn-instance vpn-instance-name ] proxy group [ ipv6-group-address | interface interface-type interface-number ] [ verbose ]

Display information about the MLD proxy routing table.

display mld [ vpn-instance vpn-instance-name ] proxy routing-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address [ prefix-length ] ] * [ verbose ]

Display MLD SSM mappings.

display mld [ vpn-instance vpn-instance-name ] ssm-mapping ipv6-group-address

Display authorization information for MLD users.

display mld user-authorization [ interface interface-type interface-number ]

Clear dynamic MLD multicast group entries.

reset mld [ vpn-instance vpn-instance-name ] group { all | interface interface-type interface-number { all | ipv6-group-address [ prefix-length ] [ ipv6-source-address [ prefix-length ] ] } }