Configuring an IPv6 multicast group policy
About IPv6 multicast group policies
This feature enables an interface to filter MLD reports by using an ACL that specifies IPv6 multicast groups and the optional sources. It is used to control the IPv6 multicast groups that the hosts attached to an interface can join.
Restrictions and guidelines
This configuration does not take effect on static group members, because static group members do not send MLD reports.
Procedure
Enter system view.
system-view
Enter interface view.
interface interface-type interface-number
Configure an IPv6 multicast group policy on the interface.
mld group-policy ipv6-acl-number [ version-number ]