IPv6 PIM snooping does not work on a Layer 2 device

IPv6 PIM snooping does not work on a Layer 2 device.

To resolve the problem:

1. Use the display current-configuration command to display information about MLD snooping and IPv6 PIM snooping.

2. If MLD snooping is not enabled, enable the MLD snooping feature, and then enable MLD snooping and IPv6 PIM snooping for the VLAN.

3. If IPv6 PIM snooping is not enabled, enable IPv6 PIM snooping for the VLAN.

4. If the problem persists, contact Hewlett Packard Enterprise Support.