Layer 2 multicast forwarding cannot function

Symptom

Layer 2 multicast forwarding cannot function through MLD snooping.

To resolve the problem:

Use the display mld-snooping command to display MLD snooping status.
If MLD snooping is not enabled, use the mld-snooping command in system view to enable the MLD snooping feature. Then, use the mld-snooping enable command in VLAN view or VSI view to enable MLD snooping for the VLAN or VSI.
If MLD snooping is enabled globally but not enabled for the VLAN or VSI, use the mld-snooping enable command in VLAN view or VSI view to enable MLD snooping for the VLAN or VSI.
If the problem persists, contact Hewlett Packard Enterprise Support.

prev	up	next
Troubleshooting MLD snooping	home	IPv6 multicast group policy does not work