An MVRF cannot be created

A VPN instance cannot create an MVRF correctly.

To resolve the problem:

1. Use the display pim bsr-info command to verify that the BSR information exists on the public network and VPN instance. If it does not, verify that a unicast route exists to the BSR.

2. Use the display pim rp-info command to examine the RP information. If no RP information is available, verify that a unicast route exists to the RP. Use the display pim neighbor command to verify that the PIM adjacencies have been correctly established on the public network and the VPN.

3. Use the ping command to examine the connectivity between the VPN DR and the VPN RP.

4. If the problem persists, contact Hewlett Packard Enterprise Support.