Specifying the default-group

Restrictions and guidelines

You must specify the same default-group on all PEs that belong to the same MVPN.

The default-group for an MVPN must be different from the default-group and the data-group used by any other MVPN.

For an MVPN that transmits both IPv4 and IPv6 multicast packets, you must specify the same default-group in MVPN IPv4 address family view and IPv6 address family view.

Procedure

  1. Enter system view.

    system-view

  2. Enter MVPN view.

    multicast-mvpn vpn-instance vpn-instance-name mode mdt

  3. Enter MVPN address family view.

    • Enter MVPN IPv4 address family view.

      address-family ipv4

    • Enter MVPN IPv6 address family view.

      address-family ipv6

  4. Specify the default-group.

    default-group group-address