No SA entries exist in the device's SA message cache

MSDP fails to send (S, G) entries through SA messages.

To resolve the problem:

1. Use the display ip routing-table command to verify that the unicast route between the devices is reachable.

2. Verify that a unicast route is available between the two devices that will become MSDP peers to each other.

3. Verify the configuration of the import-source command and its ipv4-acl-number argument, and make sure the ACL rule filters appropriate (S, G) entries.

4. If the problem persists, contact Hewlett Packard Enterprise Support.