PIM snooping does not work on a Layer 2 device

PIM snooping does not work on a Layer 2 device.

To resolve the problem:

1. Use the display current-configuration command to display information about IGMP snooping and PIM snooping.

2. If IGMP snooping is not enabled, enable the IGMP snooping feature, and then enable IGMP snooping and PIM snooping for the VLAN.

3. If PIM snooping is not enabled, enable PIM snooping for the VLAN.

4. If the problem persists, contact Hewlett Packard Enterprise Support.