[x]

Configuring PIM snooping > Enabling PIM snooping

 

 Next

Enabling PIM snooping

  1. Enter system view.

    system-view

  2. Enable the IGMP snooping feature and enter IGMP-snooping view.

    igmp-snooping

    By default, IGMP snooping is disabled.

    For more information about this command, see IGMP snooping commands in IP Multicast Command Reference.

  3. Return to system view.

    quit

  4. Enter VLAN view.

    vlan vlan-id

  5. Enable IGMP snooping for the VLAN.

    igmp-snooping enable

    By default, IGMP snooping is disabled in a VLAN.

    For more information about this command, see IP Multicast Command Reference.

  6. Enable PIM snooping for the VLAN.

    pim-snooping enable

    By default, PIM snooping is disabled in a VLAN.

prev

 

up

 next

PIM snooping tasks at a glance 

home

 Setting the aging time for global ports after a master/subordinate switchover

© Copyright 2017 Hewlett Packard Enterprise Development LP