Configuring static multicast MAC address entries

In Layer 2 multicast, multicast MAC address entries can be dynamically created through Layer 2 multicast protocols (such as IGMP snooping). You can also manually configure static multicast MAC address entries by binding multicast MAC addresses and ports to control the destination ports of the multicast data.

You must specify an unused multicast MAC address when configuring a static multicast MAC address entry. A multicast MAC address is the MAC address in which the least significant bit of the most significant octet is 1.

1. Enter system view.

   system-view

2. Configure a static multicast MAC address entry.

   mac-address multicast mac-address interface interface-list vlan vlan-id

1. Enter system view.

   system-view

2. Enter Layer 2 interface view.

   • Enter Layer 2 Ethernet interface view.

     interface interface-type interface-number

   • Enter Layer 2 aggregate interface view.

     interface bridge-aggregation interface-number

3. Configure a static multicast MAC address entry.

   mac-address multicast mac-address vlan vlan-id