Displaying and maintaining CLI login
Execute display commands in any view.
Task | Command | Remarks |
|---|---|---|
Display online CLI users. | display users [ all ] | N/A |
Display user line information. | display line [ num1 | { aux | vty } num2 ] [ summary ] | N/A |
Display the packet source setting for the Telnet client. | display telnet client | N/A |
Release a user line. | free line { num1 | { aux | vty } num2 } | Multiple users can log in to the device to simultaneously configure the device. When necessary, you can execute this command to release some connections. You cannot use this command to release the connection you are using. This command is available in user view. |
Lock the current user line and set the password for unlocking the line. | lock | By default, the system does not lock any user lines. This command is not supported in FIPS mode. This command is available in user view. |
Lock the current user line and enable unlocking authentication. | lock reauthentication | By default, the system does not lock any user lines or initiate reauthentication. To unlock the locked user line, you must press Enter and provide the login password to pass reauthentication. This command is available in any view. |
Send messages to user lines. | send { all | num1 | { aux | vty } num2 } | This command is available in user view. |