Enabling ISIS-SPB adjacency change logging
Adjacency change logging enables ISIS-SPB to send a log message to the information center when an adjacency change occurs. With the information center, you can set log message filtering and output rules, including output destinations. For more information about using the information center, see Network Management and Monitoring Configuration Guide.
To enable ISIS-SPB adjacency change logging:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter SPBM view. | spbm | N/A |
3. Enable ISIS-SPB adjacency change logging. | log-peer-change | By default, ISIS-SPB adjacency change logging is enabled. |