Configuring the control MAC address for ISIS-SPB
ISIS-SPB uses a control MAC address for ISIS-SPB peer-to-peer communication. This control MAC specifies the destination MAC address for ISIS-SPB protocol frames. Vendors might use different control MAC addresses. You can change the ISIS-SPB control MAC for interoperability in a multivendor network.
To configure the control MAC address for ISIS-SPB:
Step | Command | Remarks |
|---|---|---|
1. Enter system view. | system-view | N/A |
2. Enter SPBM view. | spbm | N/A |
3. Configure the control MAC for ISIS-SPB. | control-address { all-cb | all-is | all-l1-is | all-l2-is | all-pb } | The default control MAC for ISIS-SPB is 0180-C200-002E (all-pb). |